Generation   Home

Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly 2015 Subaru Forester

generation: → 2011 - 2016Release year → 2015 ✔ engine size → 2L ✔      add to compare      read later

CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Transfer Clutch

ASSEMBLY

1. Using the ST, install the parking gear to transfer reduction drive gear.

ST    398177700INSTALLER

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

2. Install the snap ring to transfer reduction drive gear.

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

3. Using the ST, install the transfer reduction drive gear to transfer reduction drive gear shaft.

ST    499277100BUSHING 1-2 INSTALLER

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

4. Using the ST, install the ball bearing.

NOTE:

Use a new ball bearing.

ST    499277100BUSHING 1-2 INSTALLER

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

5. Attach the transfer clutch piston to the reduction drive gear shaft.

NOTE:

Apply CVTF to the transfer clutch piston lip.

6. Install the return spring.

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

7. Install the transfer clutch piston seal.

8. Using the ST, install the snap ring.

ST    18762AA000 or 18762AA001COMPRESSOR SPECIAL TOOL

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

(A)

Snap ring

(B)

Transfer clutch piston seal

9. Install the pressure plate, driven plate, drive plate and snap ring.

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

(A)

Snap ring

10. Before measuring clearance “A”, place same thickness shims on both sides to prevent the retaining plate from tilting.

11. When clearance “A” exceeds the limit for use, replace the drive plate and driven plate as a set, and select and adjust the pressure plate within the initial specified value.

Initial standard:

0.7 — 1.1 mm (0.028 — 0.043 in)

Limit thickness:

1.6 mm (0.063 in)

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Transfer Clutch • Assembly

Pressure plate

Part No.

Thickness mm (in)

31593AA151

3.3 (0.130)

31593AA161

3.7 (0.146)

12. Check the clearance between the snap ring and retaining plate.CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Transfer Clutch > INSPECTION

    2017-02-20 18:51:00    2017-05-11 10:15:34




I advise you to watch 2011 - 2016

© 2018. suforester.com
Order call back