Generation   Home

Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Front Differential Assembly • Installation 2015 Subaru Forester

generation: → 2011 - 2016Release year → 2015 ✔ engine size → 2L ✔      add to compare      read later

CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Front Differential Assembly

INSTALLATION

1. Install the front differential assembly to the converter case.

NOTE:

Be careful not to damage the inside of the case (especially the mating surface of the differential side retainers).

2. Temporarily install the differential side retainers using ST.

ST    18658AA020WRENCH COMPL RETAINER

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Front Differential Assembly • Installation

3. Adjust the backlash of the front differential. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Front Differential Assembly > ADJUSTMENT

4. Inspect and adjust the tooth contact. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Drive Pinion Shaft Assembly > ADJUSTMENT

5. Remove the differential side retainers and install the O-rings and oil seals. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Front Differential Assembly > ASSEMBLY

NOTE:

• Record how many turns were needed to remove.

• Use new O-rings and oil seals.

6. Install the differential side retainers using ST.

NOTE:

When attaching, turn the differential side retainer by the same number of turns it took to remove, and align the marks.

ST    18658AA020WRENCH COMPL RETAINER

7. Install the lock plate.

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

2015 Subaru Forester Transmission/Transaxle • Continuously Variable Transmission(Tr690) • Front Differential Assembly • Installation

(A)

Lock plate

8. Install the drive pinion shaft assembly. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Drive Pinion Shaft Assembly > INSTALLATION

9. Install the primary pulley, secondary pulley and variator chain. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Primary Pulley and Secondary Pulley > INSTALLATION

10. Install the transmission case. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Transmission Case > INSTALLATION

11. Install the forward clutch assembly. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Forward Clutch Assembly > INSTALLATION

12. Install the intermediate case. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Intermediate Case > INSTALLATION

13. Install the transfer reduction driven gear assembly. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Transfer Reduction Driven Gear > INSTALLATION

14. Install the transfer clutch assembly. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Transfer Clutch > INSTALLATION

15. Install the rear drive shaft. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Rear Drive Shaft > INSTALLATION

16. Install the extension case. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Extension Case > INSTALLATION

17. Install the transmission harness. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Transmission Harness > INSTALLATION

18. Install the control valve body and oil pan. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Control Valve Body > INSTALLATION

19. Install the air breather hose. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Air Breather Hose > INSTALLATION

20. Install the transmission assembly to the vehicle. CONTINUOUSLY VARIABLE TRANSMISSION(TR690) > Automatic Transmission Assembly > INSTALLATION

    2017-02-20 18:50:58    2017-05-11 10:15:34




I advise you to watch 2011 - 2016

© 2018. suforester.com
Order call back