Generation   Home

Suspension • Wheel and Tire System • Tire Pressure Monitoring System • Removal 2013 Subaru Forester

generation: → 2011 - 2016Release year → 2013 ✔ engine size → 2.5L ✔      add to compare      read later

WHEEL AND TIRE SYSTEM > Tire Pressure Monitoring System

REMOVAL

1. TRANSMITTER (SNAP IN TYPE)

1. Remove the wheels from the vehicle. WHEEL AND TIRE SYSTEM > Tire and Wheel > REMOVAL

2. Remove the tires from wheels.

CAUTION:

Use a tire changer when removing the tire from the wheel.

3. Loosen the screw to remove the transmitter from the valve stem.

NOTE:

Replace the valve and screw with a new part when reusing transmitter.

2013 Subaru Forester Suspension • Wheel and Tire System • Tire Pressure Monitoring System • Removalin

(1)

Wheel

(2)

Transmitter

(3)

Screw

(4)

Valve

4. Remove the valve from the wheel.

2. TPMS & KEYLESS ENTRY CONTROL MODULE

NOTE:

TPMS control module is integrated into keyless entry control module.

1. Disconnect the ground cable from battery.

2. Remove the left rear quarter trim. EXTERIOR/INTERIOR TRIM > Rear Quarter Trim > REMOVAL

3. Disconnect the harness connector.

4. Remove the bolt and then remove the TPMS & keyless entry control module.

2013 Subaru Forester Suspension • Wheel and Tire System • Tire Pressure Monitoring System • Removal

    2017-02-20 18:50:42    2017-06-19 10:25:05




I advise you to watch 2011 - 2016

© 2018. suforester.com
Order call back