Generation   Home

Steering • Power Assisted System (Power Steering) • Universal Joint • Installation 2005 Subaru Forester

generation: → 2002 - 2007Release year → 2005 ✔ engine size → 2.5L ✔      add to compare      read later

POWER ASSISTED SYSTEM (POWER STEERING) > Universal Joint

INSTALLATION

1. Align the cutout at serrated section of the steering shaft and yoke, and then insert the universal joint into steering shaft.

2005 Subaru Forester Steering • Power Assisted System (Power Steering) • Universal Joint • Installation

(1)

Cutout

(2)

Yoke

(3)

Steering shaft

(4)

Steering shaft side

(5)

Gearbox side

2. Align the matching marks, and then insert the universal joint to serrated section of gearbox assembly.

3. Tighten the bolt.

Tightening torque:

24 N·m (2.4 kgf-m, 17.4 ft-lb)

CAUTION:

Excessively large tightening torque of the universal joint bolts may lead to heavy steering wheel operation.

Standard clearance between gearbox to DOJ:

Over 14 mm (0.55 in)

4. Align the center of roll connector. AIRBAG SYSTEM > Roll Connector > ADJUSTMENT

5. Install the steering wheel and airbag module. POWER ASSISTED SYSTEM (POWER STEERING) > Steering Wheel > INSTALLATION

WARNING:

Always refer to “Airbag System” before performing airbag module service. AIRBAG SYSTEM > General Description > CAUTION

    2017-02-20 18:50:38    2017-06-19 10:25:05




I advise you to watch 2002 - 2007

© 2019. suforester.com
Order call back