Generation   Home

Heater & Airconditioner/Ventilator • HVAC System (Heater, Ventilator and A/C) • Hose and Tube • Removal 2008 Subaru Forester

generation: → 2008 - 2010Release year → 2008 ✔ engine size → 2.5L ✔      add to compare      read later

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Hose and Tube

REMOVAL

CAUTION:

• When disconnecting/connecting hoses, do not apply an excessive force to them. Confirm that no torsion and excessive tension is charged after installing.

• Seal the disconnected hose with a plug or vinyl tape to prevent dirt from entering.

1. Disconnect the ground cable from the battery.

2. Using the refrigerant recovery system, discharge refrigerant. HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Recovery Procedure > PROCEDURE

3. Remove the evaporator unit attaching bolts (A).

4. Remove the low-pressure hose attaching bolts (B).

5. Disconnect the low-pressure hose from evaporator unit.

6. Disconnect the low-pressure hose from compressor.

7. Remove the low-pressure hose from vehicle.

8. Remove the high-pressure hose attaching bolts (C).

9. Disconnect the high-pressure hose from compressor.

10. Disconnect the high-pressure hose from condenser.

11. Remove the high-pressure hose from vehicle.

12. Remove the high-pressure tube attaching bolt (D).

13. Remove the high-pressure tube from vehicle.

2008 Subaru Forester Heater & Airconditioner/Ventilator • HVAC System (Heater, Ventilator and A/C) • Hose and Tube • Removal

    2017-02-20 18:50:35    2017-05-11 10:18:39




I advise you to watch 2008 - 2010

© 2018. suforester.com
Order call back