Generation   Home

Heater & Airconditioner/Ventilator • HVAC System (Heater, Ventilator and A/C) • Expansion Valve • Removal 2015 Subaru Forester

generation: → 2011 - 2016Release year → 2015 ✔ engine size → 2L ✔      add to compare      read later

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Expansion Valve

REMOVAL

1. Disconnect the ground cable from battery.

2. Using the refrigerant recovery system, discharge refrigerant.HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Recovery Procedure > PROCEDURE

3. Remove the air intake boot. (Non-turbo model)INTAKE (INDUCTION)(H4DO) > Air Intake Boot > REMOVAL

CAUTION:

Move aside the air intake boot to perform the operation without disconnecting the PCV hose.

4. Remove the intercooler. (Turbo model)INTAKE (INDUCTION)(H4DOTC) > Intercooler > REMOVAL

5. Remove the expansion valve - cooling.

(1) Remove the bolt, and detach the hose - pressure suction and the pipe - evaporator cooling.

CAUTION:

Seal the disconnected hose, pipe and engaging part of expansion valve with a plug or vinyl tape to prevent foreign matter from entering.

2015 Subaru Forester Heater & Airconditioner/Ventilator • HVAC System (Heater, Ventilator and A/C) • Expansion Valve • Removal

(2) Remove the bolt, and remove the expansion valve - cooling.

CAUTION:

Seal the disconnected pipe and engaging part of expansion valve with a plug or vinyl tape to prevent foreign matter from entering.

Preparation tool:

Hexagon wrench: 4 mm (0.16 in)

2015 Subaru Forester Heater & Airconditioner/Ventilator • HVAC System (Heater, Ventilator and A/C) • Expansion Valve • Removal

    2017-02-20 18:50:35    2017-05-11 10:18:39




I advise you to watch 2011 - 2016

© 2018. suforester.com
Order call back