Generation   Home

General • Periodic Maintenance Services • V-Belt • Inspection 2009 Subaru Forester

generation: → 2008 - 2010Release year → 2009 ✔ engine size → 2.5L ✔      add to compare      read later

PERIODIC MAINTENANCE SERVICES > V-belt

INSPECTION

NOTE:

The rear belt does not require tension adjustment because it is a stretch-type belt.

1. PROCEDURE NOT USING BELT A TENSION GAUGE

1. Replace the belts, if crack, fraying or wear is found.

2. Check the V-belt tension and adjust it if necessary by changing the generator installing position or idler pulley installing position. PERIODIC MAINTENANCE SERVICES > V-belt > REPLACEMENT

Belt tension (when pressed with 98 N (10 kgf, 22 lbf))

When replacing: 7 — 9 mm (0.276 — 0.354 in)

When reusing: 9 — 11 mm (0.354 — 0.433 in)

2009 Subaru Forester General • Periodic Maintenance Services • V-Belt • Inspection

C/P

Crank pulley

GEN

Generator

P/S

Power steering oil pump pulley

A/C

A/C compressor pulley

2. PROCEDURE WITH BELT TENSION GAUGE

1. Replace the belts, if crack, fraying or wear is found.

2. Remove the V-belt cover and radiator reservoir tank.

3. Check the tension of the V-belt using the belt tension gauge. Adjust the tension if necessary by adjusting the installation position of the generator or idler pulley.

Belt tension (Non-turbo model)

When installing new parts:

640 — 780 N (65 — 80 kgf, 144 — 175 lbf)

At inspection:

490 — 640 N (50 — 65 kgf, 110 — 144 lbf)

Belt tension (Turbo model)

When installing new parts:

640 — 780 N (65 — 80 kgf, 144 — 175 lbf)

At inspection:

490 — 640 N (50 — 65 kgf, 110 — 144 lbf)

2009 Subaru Forester General • Periodic Maintenance Services • V-Belt • Inspection

C/P

Crank pulley

GEN

Generator

P/S

Power steering oil pump pulley

A/C

A/C compressor pulley

    2017-02-20 18:50:33    2017-05-11 10:18:46




I advise you to watch 2008 - 2010

© 2018. suforester.com
Order call back