Generation   Home

Body & Electrical • Glass/Windows/Mirrors • Power Window Control Switch • Inspection 2015 Subaru Forester

generation: → 2011 - 2016Release year → 2015 ✔ engine size → 2L ✔      add to compare      read later

GLASS/WINDOWS/MIRRORS > Power Window Control Switch

INSPECTION

1. MAIN SWITCH

• Driver’s seat

CAUTION:

Since the switch - power window main is controlled by CPU, do not check continuity for switch alone with the circuit tester. Performing continuity check with circuit tester can damage the switch - power window main circuit.

Check output from the switch - power window main to the driver’s side motor using the oscilloscope function in the Subaru Select Monitor.

1. Remove the switch - power window main.

2. Connect the battery and the Subaru Select Monitor to the switch - power window main terminal.

CAUTION:

Never mix up the terminals when connecting the harness connector of the switch - power window main and the battery. If the connection is wrong, the switch - power window main may be damaged.

NOTE:

• When the battery is connected to the switch - power window main terminal, the letters “AUTO” on the driver’s side knob illuminates.

• For detailed procedures, refer to “Subaru Select Monitor Operation Manual”.

2015 Subaru Forester Body & Electrical • Glass/Windows/Mirrors • Power Window Control Switch • Inspection

3. Operate the switch - power window main and check the output.

NOTE:

Since output time during window UP operation is extremely short, it cannot be checked without using a measuring instrument such as oscilloscope. Output is constantly produced while the switch is operated for window DOWN operation.

Inspection conditions

Output time

Standard

AUTO UP

Approx. 130 ms

Battery voltage

UP

OFF

0 V

DOWN

During switch operation

Battery voltage

AUTO DOWN

Approx. 300 ms

4. If the inspection result is not within the standard, replace the switch - power window main.

• Except for driver’s seat

1. Check the resistance between terminals of the switch - power window main.

2015 Subaru Forester Body & Electrical • Glass/Windows/Mirrors • Power Window Control Switch • Inspection

 

Terminal No.

Inspection conditions

Standard

Passenger’s seat

14 — 8

1 — 2

UP

Less than 1 ?

14 — 2

14 — 8

OFF

1 M? or more

1 — 8

1 — 2

8 — 2

Less than 1 ?

14 — 2

1 — 8

DOWN

Less than 1 ?

Rear LH

14 — 15

1 — 16

UP

Less than 1 ?

14 — 15

14 — 16

OFF

1 M? or more

1 — 15

1 — 16

15 — 16

Less than 1 ?

14 — 16

1 — 15

DOWN

Less than 1 ?

Rear RH

14 — 7

1 — 6

UP

Less than 1 ?

14 — 7

14 — 6

OFF

1 M? or more

1 — 6

1 — 7

6 — 7

Less than 1 ?

14 — 6

1 — 7

DOWN

Less than 1 ?

2. If the inspection result is not within the standard, replace the switch - power window main.

2. SUB-SWITCH

1. Remove the switch - power window sub.

2. Check the resistance between terminals of the switch - power window sub.

2015 Subaru Forester Body & Electrical • Glass/Windows/Mirrors • Power Window Control Switch • Inspection

 

Terminal No.

Inspection conditions

Standard

Passenger seat, rear

6 — 5

8 — 7

UP

Less than 1 ?

7 — 6

4 — 6

OFF

1 M? or more

5 — 4

8 — 7

Less than 1 ?

6 — 8

5 — 4

DOWN

Less than 1 ?

3. If the inspection result is not within the standard, replace the switch - power window sub.

    2017-02-20 18:49:23    2017-05-11 10:14:30




I advise you to watch 2011 - 2016

© 2018. suforester.com
Order call back