Generation   Home
Categories
generation

Starter

Sort by: default name

Engine • Starting/Charging Systems(H4SO) • Starter • Removal 2010 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the air intake chamber. (non-turbo model) INTAKE...

Engine • Starting/Charging Systems(H4SO) • Starter • Installation 2008 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter INSTALLATION Install in the reverse order of removal. NOTE: For MT model, the bolt is used in place of nut (A) shown in the...

Engine • Starting/Charging Systems(H4SO) • Starter • Inspection 2005 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter INSPECTION 1. ARMATURE 1. Check the commutator for any sign of burns of rough surfaces or stepped wear. If wear is of a minor...

Engine • Starting/Charging Systems(H4SO) • Starter • Disassembly 2005 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter DISASSEMBLY 1. STARTER ASSEMBLY 1. Loosen the nut which holds terminal M of switch assembly, and then disconnect the connector....

Engine • Starting/Charging Systems(H4SO) • Starter • Disassembly 2009 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter DISASSEMBLY 1. Loosen the nuts fastening the magnet switch assembly M terminal, then disconnect the harness from the terminal....

Engine • Starting/Charging Systems(H4SO) • Starter • Disassembly 2010 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter DISASSEMBLY 1. Disconnect the terminal M from the magnet switch assembly. 2. Remove the magnet switch assembly from the starter...

Engine • Starting/Charging Systems(H4SO) • Starter • Assembly 2010 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter ASSEMBLY 1. Apply grease to the shaft sliding surfaces of the internal gear assembly. Grease: Marutemp #6129 or equivalent 2....

Engine • Starting/Charging Systems(H4SO) • Starter • Assembly 2008 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Starter ASSEMBLY NOTE: Apply grease to the following parts before assembly. • Sleeve bearing • Pinion shaft rotational portion •...

Engine • Starting/Charging Systems(H4DO) • Starter • Removal 2015 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Starter REMOVAL 1. NON-TURBO MODEL 1. Disconnect the ground cable from battery. 2. Remove the clip (A) from the air intake boot. 3....

Engine • Starting/Charging Systems(H4DO) • Starter • Removal 2013 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Starter REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the clip (A) from the air intake boot. 3. Loosen the clamp (B)...

Engine • Starting/Charging Systems(H4DO) • Starter • Installation 2013 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Starter INSTALLATION Install in the reverse order of removal. NOTE: For the AT model, a nut is used at (A). Tightening torque: 50 N·m...

Engine • Starting/Charging Systems(H4DO) • Starter • Installation 2015 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Starter INSTALLATION 1. NON-TURBO MODEL Install in the reverse order of removal. Tightening torque: 50 N·m (5.1 kgf-m, 36.9 ft-lb) NOTE:...

Engine • Starting/Charging Systems(H4DO) • Starter • Inspection 2013 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Starter INSPECTION 1. ARMATURE 1. Check the commutator for signs of seizure or stepped wear caused by roughness of the surface. If there is...

Engine • Starting/Charging Systems(H4DO) • Starter • Disassembly 2013 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Starter DISASSEMBLY 1. Disconnect the terminal M from the magnet switch assembly. 2. Remove the magnet switch assembly from the starter...

Engine • Starting/Charging Systems(H4DO) • Starter • Assembly 2013 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Starter ASSEMBLY 1. Apply grease to the shaft sliding surfaces of the internal gear assembly. Grease: Multemp #6129 or equivalent 2....
© 2018. suforester.com
Order call back