Generation   Home
Categories
generation

Powertrain

Sort by: default name

Transmission/Transaxle • Manual Transmission and Differential(5MT) • Drive Pinion Shaft Assembly • Assembly 2005 Subaru Forester MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft Assembly ASSEMBLY 1. Install the sleeve and assembly by matching alignment marks. NOTE: Use a new gear and...

Transmission/Transaxle • Manual Transmission and Differential(5MT) • Drive Pinion Shaft Assembly • Adjustment 2005 Subaru Forester MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft Assembly ADJUSTMENT 1. THRUST BEARING PRELOAD 1. After completing the preceding steps 1) through 3), select...

Transmission/Transaxle • Manual Transmission and Differential(5MT) • Center Differential • Disassembly 2007 Subaru Forester MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center Differential DISASSEMBLY 1. Remove the ball bearing using ST. NOTE: Do not reuse the ball bearing. ST    498077300...

Transmission/Transaxle • Manual Transmission and Differential(5MT) • Center Differential • Assembly 2013 Subaru Forester MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center Differential ASSEMBLY Install the ball bearing into the center differential assembly. CAUTION: Do not apply a load in...

Transmission/Transaxle • Control Systems • Select Lever • Removal 2013 Subaru Forester CONTROL SYSTEMS > Select Lever REMOVAL 1. Shift the select lever to “N” range. 2. Disconnect the ground cable from battery. 3. Lift up the vehicle. 4. Remove the rear...

Transmission/Transaxle • Control Systems • Select Lever • Removal 2005 Subaru Forester CONTROL SYSTEMS > Select Lever REMOVAL 1. Set the vehicle on a lift. 2. Disconnect the ground cable from battery. 3. Move the select lever to “N” range. 4. Lift-up the...

Transmission/Transaxle • Control Systems • Select Lever • Installation 2008 Subaru Forester CONTROL SYSTEMS > Select Lever INSTALLATION 1. Mount the select lever onto the vehicle body. 2. Tighten the four bolts at the prescribed torque, then connect the connector....

Transmission/Transaxle • Control Systems • Select Lever • Installation 2015 Subaru Forester CONTROL SYSTEMS > Select Lever INSTALLATION 1. Set the select lever assembly to the vehicle body. 2. Tighten the four mounting bolts to attach the select lever assembly to...

Transmission/Transaxle • Control Systems • Select Lever • Installation 2013 Subaru Forester CONTROL SYSTEMS > Select Lever INSTALLATION 1. Set the select lever to vehicle body. 2. Tighten the four bolts to install the select lever to vehicle body, and then connect...

Transmission/Transaxle • Control Systems • Select Lever • Disassembly 2008 Subaru Forester CONTROL SYSTEMS > Select Lever DISASSEMBLY 1. Remove the packing. 2. Remove the grip. 3. Remove the indicator light, and then remove the indicator cover. NOTE: Be careful...

Transmission/Transaxle • Control Systems • Select Lever • Disassembly 2015 Subaru Forester CONTROL SYSTEMS > Select Lever DISASSEMBLY 1. GRIP ASSY 1. Remove the button assembly_AT. (A) Claw         2. Remove the rod COMPL. 2. AT SELECT LEVER...

Transmission/Transaxle • Control Systems • Select Lever • Disassembly 2013 Subaru Forester CONTROL SYSTEMS > Select Lever DISASSEMBLY 1. Remove the gasket and plate COMPL. 2. Insert a flat tip screwdriver with a thin tip under the connector and disconnect each...

Transmission/Transaxle • Control Systems • Select Cable • Removal 2006 Subaru Forester CONTROL SYSTEMS > Select Cable REMOVAL 1. Set the vehicle on a lift. 2. Disconnect the ground cable from battery. 3. Prior to removal, set the lever to “N” range. 4....

Transmission/Transaxle • Control Systems • Select Cable • Removal 2013 Subaru Forester CONTROL SYSTEMS > Select Cable REMOVAL 1. Shift the select lever to “N” range. 2. Disconnect the ground cable from battery. 3. Lift up the vehicle. 4. Remove the front...

Transmission/Transaxle • Control Systems • Select Cable • Installation 2007 Subaru Forester CONTROL SYSTEMS > Select Cable INSTALLATION 1. Install the select cable to plate assembly. Tightening torque: 18 N·m (1.8 kgf-m, 13.0 ft-lb) 2. Install the select cable to...

Transmission/Transaxle • Control Systems • Select Cable • Installation 2015 Subaru Forester CONTROL SYSTEMS > Select Cable INSTALLATION 1. Position the select cable as shown in the figure, and install it to the plate assembly. CAUTION: • If the cable is installed...

Transmission/Transaxle • Control Systems • Select Cable • Adjustment 2015 Subaru Forester CONTROL SYSTEMS > Select Cable ADJUSTMENT 1. Shift the select lever to “N” range. 2. Lift up the vehicle. 3. Remove the center exhaust pipe. (Non-turbo model) EXHAUST(H4DO)...

Transmission/Transaxle • Control Systems • Select Cable • Adjustment 2008 Subaru Forester CONTROL SYSTEMS > Select Cable ADJUSTMENT 1. Set the vehicle on a lift. 2. Set the select lever to “N” range. 3. Lift up the vehicle. 4. Remove the rear exhaust pipe and...

Transmission/Transaxle • Control Systems • MT Gear Shift Lever • Removal 2015 Subaru Forester CONTROL SYSTEMS > MT Gear Shift Lever REMOVAL 1. Disconnect the ground cable from battery. 2. Lift up the vehicle. 3. Remove the center exhaust pipe. EXHAUST(H4DO) > Center...

Transmission/Transaxle • Control Systems • MT Gear Shift Lever • Removal 2011 Subaru Forester CONTROL SYSTEMS > MT Gear Shift Lever REMOVAL 1. Set the vehicle on a lift. 2. Disconnect the ground cable from battery. 3. Remove the gear shift knob. 4. Remove the...

Transmission/Transaxle • Control Systems • MT Gear Shift Lever • Installation 2015 Subaru Forester CONTROL SYSTEMS > MT Gear Shift Lever INSTALLATION 1. Install the gear shift lever assembly. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 2. Install the harness...

Transmission/Transaxle • Control Systems • MT Gear Shift Lever • Installation 2013 Subaru Forester CONTROL SYSTEMS > MT Gear Shift Lever INSTALLATION 1. Install the joint to the transmission and secure with a spring pin. (A) Joint (B) Spring pin 2....

Transmission/Transaxle • Control Systems • MT Gear Shift Lever • Inspection 2015 Subaru Forester CONTROL SYSTEMS > MT Gear Shift Lever INSPECTION 1. Check the parts for deformation, damage and wear. Repair or replace if necessary. Compare the removed parts with new parts...

Transmission/Transaxle • Control Systems • MT Gear Shift Lever • Inspection 2013 Subaru Forester CONTROL SYSTEMS > MT Gear Shift Lever INSPECTION 1. Check the parts (bushing, cushion rubber, spacer, boot, stay and rod, etc.) for deformation, damage and wear. If...
© 2018. suforester.com
Order call back