Generation   Home
Categories
generation

Ignition Coils

Sort by: default name

Engine • Ignition(H4SO) • Ignition Coil and Ignitor Assembly • Removal 2010 Subaru Forester IGNITION(H4SO) > Ignition Coil and Ignitor Assembly REMOVAL 1. Disconnect the ground cable from battery. 2. Disconnect the spark plug cords from ignition coil and ignitor...

Engine • Ignition(H4SO) • Ignition Coil and Ignitor Assembly • Inspection 2008 Subaru Forester IGNITION(H4SO) > Ignition Coil and Ignitor Assembly INSPECTION Check the following items using a tester. Replace if defective. • Secondary coil resistance CAUTION: • If...

IGNITION(H4DOTC) > Ignition Coil INSTALLATION Direct ignition type is adopted. Refer to “Spark Plug” for the installation procedure. IGNITION(H4DOTC) > Spark Plug >...

IGNITION(H4DOTC) > Ignition Coil REMOVAL Direct ignition type is adopted. Refer to “Spark Plug” for removal procedure. IGNITION(H4DOTC) > Spark Plug > REMOVAL

IGNITION(H4DOTC) > Ignition Coil INSPECTION For inspection procedure, refer to “Diagnostics for Engine Starting Failure”. ENGINE (DIAGNOSTICS)(H4DOTC) > Diagnostics for...

IGNITION(H4DO) > Ignition Coil REMOVAL Direct ignition type is adopted. Refer to “Spark Plug” for removal procedure. IGNITION(H4DO) > Spark Plug > REMOVAL

IGNITION(H4DO) > Ignition Coil INSTALLATION Direct ignition type is adopted. Refer to “Spark Plug” for the installation procedure. IGNITION(H4DO) > Spark Plug > INSTALLATION

IGNITION(H4DO) > Ignition Coil INSPECTION For inspection procedure, refer to “Diagnostics for Engine Starting Failure”. ENGINE (DIAGNOSTICS)(H4DO) > Diagnostics for Engine...

IGNITION(H4DOTC) > Ignition Coil REMOVAL Direct ignition type has been adopted. Refer to “Removing Spark Plugs” for removal procedure. IGNITION(H4DOTC) > Spark Plug > REMOVAL

IGNITION(H4SO) > Ignition Coil and Ignitor Assembly INSTALLATION Install in the reverse order of removal. Tightening torque: 6.4 N·m (0.65 kgf-m, 4.7 ft-lb) CAUTION:...

IGNITION(H4DOTC) > Ignition Coil INSPECTION For inspection procedures, refer to “Diagnostics for Engine Start Failure”. ENGINE (DIAGNOSTICS)(H4DOTC) > Diagnostics for Engine...

IGNITION(H4DOTC) > Ignition Coil INSTALLATION Install in the reverse order of removal. Tightening torque: 16 N·m (1.6 kgf-m, 11.7 ft-lb)

IGNITION(H4DOTC) > Ignition Coil and Ignitor Assembly REMOVAL Direct ignition type has been adopted. Refer to "Removing Spark Plugs" for removal procedures. IGNITION(H4DOTC)...

IGNITION(H4DOTC) > Ignition Coil and Ignitor Assembly INSTALLATION Install in the reverse order of removal. Tightening torque: 16 N·m (1.6 kgf-m, 11.7 ft-lb)

IGNITION(H4DOTC) > Ignition Coil and Ignitor Assembly INSPECTION Refer to the following for inspection procedures. ENGINE (DIAGNOSTICS)(H4DOTC) > Diagnostics for Engine...

IGNITION(H4DOTC) > Ignition Coil and Ignitor ASSY REMOVAL Direct ignition type has been adopted. Refer to the “Spark Plug Removal” for removal procedure. IGNITION(H4DOTC) >...

IGNITION(H4DOTC) > Ignition Coil and Ignitor ASSY INSTALLATION Install in the reverse order of removal. Tightening torque: 16 N·m (1.6 kgf-m, 11.7 ft-lb)

IGNITION(H4DOTC) > Ignition Coil and Ignitor ASSY INSPECTION For inspection, refer to the following. ENGINE (DIAGNOSTICS)(H4DOTC) > Diagnostics for Engine Starting Failure >...
© 2018. suforester.com
Order call back