Generation   Home
Categories
generation

Horn

Sort by: default name

Body & Electrical • Communication System • Horn System • Inspection 2013 Subaru Forester COMMUNICATION SYSTEM > Horn System INSPECTION Symptoms Inspection steps Horn does not sound 1. Check the fuse. 2. Check the horn relay. 3. Check the...

Body & Electrical • Communication System • Horn System • Inspection 2010 Subaru Forester COMMUNICATION SYSTEM > Horn System INSPECTION 1. HORN RELAY Connect terminal No. 4 to the battery positive terminal and terminal No. 3 to the battery ground terminal, and...

Body & Electrical • Communication System • Horn System • Inspection 2005 Subaru Forester COMMUNICATION SYSTEM > Horn System INSPECTION 1. HORN RELAY Measure the horn relay resistance between terminals (indicated in table below) when connecting terminal No. 4 to...

Body & Electrical • Communication System • Horn Switch • Removal 2015 Subaru Forester COMMUNICATION SYSTEM > Horn Switch REMOVAL NOTE: Horn switch is a unit with the driver’s airbag module. 1. Position the front wheels straight ahead. (After moving a vehicle...

Body & Electrical • Communication System • Horn Switch • Inspection 2013 Subaru Forester COMMUNICATION SYSTEM > Horn Switch INSPECTION 1. Remove the horn switch. COMMUNICATION SYSTEM > Horn Switch > REMOVAL 2. Check the resistance between horn switch terminal...

Body & Electrical • Communication System • Horn Switch • Inspection 2010 Subaru Forester COMMUNICATION SYSTEM > Horn Switch INSPECTION Measure the resistance between horn switch terminal and airbag module bracket. (1) Horn switch terminal (2)...

Body & Electrical • Communication System • Horn Switch • Inspection 2015 Subaru Forester COMMUNICATION SYSTEM > Horn Switch INSPECTION 1. CHECK HORN SWITCH 1. Remove the horn switch. COMMUNICATION SYSTEM > Horn Switch > REMOVAL 2. Check that the connection of...

Body & Electrical • Communication System • Horn • Removal 2013 Subaru Forester COMMUNICATION SYSTEM > Horn REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the front bumper face. EXTERIOR/INTERIOR TRIM > Front Bumper > REMOVAL 3....

Body & Electrical • Communication System • Horn • Removal 2015 Subaru Forester COMMUNICATION SYSTEM > Horn REMOVAL CAUTION: Do not remove the bumper face - front when removing the horn, in order to prevent damaging the claws of the bracket - front...

Body & Electrical • Communication System • Horn • Inspection 2013 Subaru Forester COMMUNICATION SYSTEM > Horn INSPECTION 1. Remove the horn. COMMUNICATION SYSTEM > Horn > REMOVAL 2. Check the horn sounds when applying the battery voltage to the horn...

Body & Electrical • Communication System • Horn • Inspection 2010 Subaru Forester COMMUNICATION SYSTEM > Horn INSPECTION With 12 V direct current supply between horn terminal and case ground, check that the horn sounds properly. Replace the horn if...

Body & Electrical • Communication System • Horn • Inspection 2015 Subaru Forester COMMUNICATION SYSTEM > Horn INSPECTION 1. CHECK HORN ASSEMBLY 1. Remove the horn assembly (Hi & Lo). COMMUNICATION SYSTEM > Horn > REMOVAL 2. Check the horn sounds when...

Body & Electrical • Communication System • Horn • Inspection 2005 Subaru Forester COMMUNICATION SYSTEM > Horn INSPECTION With 12 V direct current supplied between horn terminal and case ground, check that the horn sounds properly.

COMMUNICATION SYSTEM > Horn INSTALLATION Install each part in the reverse order of removal. Tightening torque: Horn assembly - Hi: 13 N·m (1.33 kgf-m, 9.6 ft-lb) Horn...

COMMUNICATION SYSTEM > Horn Switch INSTALLATION CAUTION: • Before handling the airbag module, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. AIRBAG SYSTEM...

COMMUNICATION SYSTEM > Horn INSTALLATION 1. Install each part in the reverse order of removal. Tightening torque: Lo side: 18 N·m (1.84 kgf-m, 13.3 ft-lb) Hi side: 13 N·m...

COMMUNICATION SYSTEM > Horn Switch REMOVAL WARNING: Always refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM” before handling the airbag module. AIRBAG SYSTEM >...

COMMUNICATION SYSTEM > Horn Switch INSTALLATION Install each part in the reverse order of removal. Tightening torque: Driver’s airbag module: 10 N·m (1.02 kgf-m, 7.4 ft-lb)

COMMUNICATION SYSTEM > Horn INSTALLATION Install in the reverse order of removal.

COMMUNICATION SYSTEM > Horn Switch INSTALLATION Install in the reverse order of removal.

COMMUNICATION SYSTEM > Horn Switch REMOVAL WARNING: Before servicing, be sure to read the notes in the AB section for proper handling of the driver airbag module. AIRBAG...
© 2018. suforester.com
Order call back