Generation   Home
Categories
generation

Front

Sort by: default name

Driveline/Axle • Drive Shaft System • Front Axle • Removal 2009 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle REMOVAL 1. Disconnect the ground cable from the battery. 2. Lift up the vehicle, and remove the front wheels. 3. Disconnect the front...

Driveline/Axle • Drive Shaft System • Front Axle • Removal 2010 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle REMOVAL 1. Lift up the vehicle, and remove the front wheels. 2. Lift the crimped section of axle nut. 3. Remove the axle nut using a...

Driveline/Axle • Drive Shaft System • Front Axle • Removal 2007 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle REMOVAL 1. Lift-up the vehicle, and remove the front wheels. 2. Lift the crimped section of axle nut. 3. Remove the axle nut using a...

Driveline/Axle • Drive Shaft System • Front Axle • Installation 2015 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle INSTALLATION 1. Install the front axle shaft assembly. CAUTION: • Do not tap the axle shaft using a hammer when installing axle shaft...

Driveline/Axle • Drive Shaft System • Front Axle • Installation 2013 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle INSTALLATION 1. Align the alignment mark on the camber adjusting bolt head, and tighten the housing and strut using a new self-locking nut....

Driveline/Axle • Drive Shaft System • Front Axle • Inspection 2008 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle INSPECTION 1. While moving the front tire up and down by hand, check that there is no looseness in the bearing, and check that the wheel...

Driveline/Axle • Drive Shaft System • Front Axle • Disassembly 2013 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle DISASSEMBLY 1. Remove the four bolts from the housing (A), and remove the front hub unit bearing and disc cover. CAUTION: • Do not get...

Driveline/Axle • Drive Shaft System • Front Axle • Assembly 2013 Subaru Forester DRIVE SHAFT SYSTEM > Front Axle ASSEMBLY 1. Assemble the front hub unit bearing. DRIVE SHAFT SYSTEM > Front Hub Unit Bearing > ASSEMBLY 2. Place the disc cover between...
© 2018. suforester.com
Order call back