Generation   Home
Categories
generation

Frame and Structure

Sort by: default name

Suspension • Rear Suspension • Rear Sub Frame • Removal 2013 Subaru Forester REAR SUSPENSION > Rear Sub Frame REMOVAL 1. Disconnect the ground cable from battery. 2. Lift up the vehicle, and then remove the rear wheels. 3. Disconnect the...

Suspension • Rear Suspension • Rear Crossmember • Removal 2008 Subaru Forester REAR SUSPENSION > Rear Crossmember REMOVAL CAUTION: Do not apply excessive tension to the ABS wheel speed sensor harness. 1. Separate the front exhaust pipe from the rear...

Suspension • Front Suspension • Sub Frame • Removal 2007 Subaru Forester FRONT SUSPENSION > Sub Frame REMOVAL 1. Lift-up the vehicle. 2. Remove the under cover. 3. Remove the bolt cover. 4. Remove the clip. 5. Remove the sub frame....

Suspension • Front Suspension • Front Crossmember Support Plate • Removal 2015 Subaru Forester FRONT SUSPENSION > Front Crossmember Support Plate REMOVAL 1. Lift up the vehicle. 2. Remove the bolts and clips, and remove the under cover - front. (1) Under...

Suspension • Front Suspension • Front Crossmember • Removal 2015 Subaru Forester FRONT SUSPENSION > Front Crossmember REMOVAL CAUTION: • The power steering control module continues to operate after the engine stops and calculate the temperature in the...

Suspension • Front Suspension • Front Crossmember • Removal 2008 Subaru Forester FRONT SUSPENSION > Front Crossmember REMOVAL 1. Lift up the vehicle, and remove the front wheels. 2. Remove the sub frame. 3. Remove the stabilizer and jack-up plate....

Suspension • Front Suspension • Front Crossmember • Installation 2015 Subaru Forester FRONT SUSPENSION > Front Crossmember INSTALLATION 1. Check the crossmember for damage or cracks, and correct or replace if defective. 2. Install the universal joint assembly...

FRONT SUSPENSION > Front Crossmember Support Plate INSTALLATION Install each part in the reverse order of removal. Tightening torque: Front crossmember support — front...

REAR SUSPENSION > Rear Sub Frame INSTALLATION CAUTION: • Be sure to use a new self-locking nut. • Always tighten the bushing in the state where the vehicle is at curb...

REAR SUSPENSION > Rear Sub Frame INSPECTION Check the removed parts for wear, damage and crack, and repair or replace them if faulty.

FRONT SUSPENSION > Front Crossmember INSTALLATION 1. Install each part in the reverse order of removal. CAUTION: • Use a new bolt and self-locking nut. For parts which are...

FRONT SUSPENSION > Front Crossmember INSPECTION Check the crossmember for damage or cracks, and correct or replace if defective.
© 2018. suforester.com
Order call back