Generation   Home
Categories
generation

Engine Block

Sort by: default name

Engine • Mechanical(H4SO) • Engine Assembly • Removal 2010 Subaru Forester MECHANICAL(H4SO) > Engine Assembly REMOVAL 1. Set the vehicle on a lift. 2. Change the bolt installation position from (A) to (B), then open the front hood completely....

Engine • Mechanical(H4SO) • Engine Assembly • Installation 2009 Subaru Forester MECHANICAL(H4SO) > Engine Assembly INSTALLATION 1. Install the engine mount onto the engine. Tightening torque: 35 N·m (3.6 kgf-m, 25.8 ft-lb) 2. Apply a small amount of...

Engine • Mechanical(H4SO) • Engine Assembly • Installation 2008 Subaru Forester MECHANICAL(H4SO) > Engine Assembly INSTALLATION 1. Install the front cushion rubbers to engine. Tightening torque: 35 N·m (3.6 kgf-m, 25.8 ft-lb) 2. Apply a small amount...

Engine • Mechanical(H4SO) • Cylinder Head • Removal 2009 Subaru Forester MECHANICAL(H4SO) > Cylinder Head REMOVAL NOTE: Perform the work with the engine installed to body when replacing a single part. Refer to “Valve Clearance” for preparation...

Engine • Mechanical(H4SO) • Cylinder Head • Removal 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Head REMOVAL NOTE: • When replacing the single part, perform the work with the engine installed to vehicle body. Refer to “Valve Clearance” for...

Engine • Mechanical(H4SO) • Cylinder Head • Removal 2006 Subaru Forester MECHANICAL(H4SO) > Cylinder Head REMOVAL 1. Remove the V-belts. MECHANICAL(H4SO) > V-belt > REMOVAL 2. Remove the crank pulley. MECHANICAL(H4SO) > Crank Pulley > REMOVAL 3....

Engine • Mechanical(H4SO) • Cylinder Head • Installation 2006 Subaru Forester MECHANICAL(H4SO) > Cylinder Head INSTALLATION 1. Install the cylinder head and gaskets on cylinder block. CAUTION: • Use new cylinder head gaskets. • Be careful not to...

Engine • Mechanical(H4SO) • Cylinder Head • Inspection 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Head INSPECTION 1. CYLINDER HEAD 1. Check for cracks or damage. Use liquid penetrant tester on the important sections to check for fissures....

Engine • Mechanical(H4SO) • Cylinder Head • Inspection 2005 Subaru Forester MECHANICAL(H4SO) > Cylinder Head INSPECTION 1. VALVE SPRING 1. Check the valve springs for damage, free length, and tension. Replace the valve spring if it is not within the...

Engine • Mechanical(H4SO) • Cylinder Head • Disassembly 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Head DISASSEMBLY 1. Place the cylinder head on the ST. ST    498267800 CYLINDER HEAD TABLE 2. Compress the valve spring and remove the...

Engine • Mechanical(H4SO) • Cylinder Head • Assembly 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Head ASSEMBLY (1) Valve (6) Retainer (11) Plug (2) Valve guide (7) Retainer key (12) Camshaft cap...

Engine • Mechanical(H4SO) • Cylinder Head • Adjustment 2005 Subaru Forester MECHANICAL(H4SO) > Cylinder Head ADJUSTMENT 1. CYLINDER HEAD 1. Make sure that no crack or other damage do not exist. In addition to visual inspection, inspect important...

Engine • Mechanical(H4SO) • Cylinder Block • Removal 2008 Subaru Forester MECHANICAL(H4SO) > Cylinder Block REMOVAL NOTE: Before conducting this procedure, drain the engine oil completely. 1. Remove the intake manifold. FUEL INJECTION (FUEL...

Engine • Mechanical(H4SO) • Cylinder Block • Installation 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Block INSTALLATION (1) Crankshaft bearing (4) Rear oil seal (6) Seal washer (2) Crankshaft (5) O-ring (7)...

Engine • Mechanical(H4SO) • Cylinder Block • Inspection 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Block INSPECTION 1. CYLINDER BLOCK 1. Check for cracks or damage. Use liquid penetrant tester on the important sections to check for fissures....

Engine • Mechanical(H4SO) • Cylinder Block • Inspection 2005 Subaru Forester MECHANICAL(H4SO) > Cylinder Block INSPECTION 1. CYLINDER BLOCK 1. Visually check for cracks and damage. Especially, inspect the important parts by means of red lead check....

Engine • Mechanical(H4SO) • Cylinder Block • Disassembly 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Block DISASSEMBLY (1) Connecting rod cap (4) Second ring (6) Snap ring (2) Connecting rod bearing (5) Oil ring...

Engine • Mechanical(H4SO) • Cylinder Block • Assembly 2010 Subaru Forester MECHANICAL(H4SO) > Cylinder Block ASSEMBLY (1) Connecting rod bearing (5) Second ring Tightening torque:N·m (kgf-m, ft-lb) (2) Connecting rod (6)...

Engine • Mechanical(H4DOTC) • Engine Assembly • Removal 2005 Subaru Forester MECHANICAL(H4DOTC) > Engine Assembly REMOVAL 1. Set the vehicle on lift arms. 2. Open the front hood fully, and then support with the hood stay. 3. Collect the refrigerant...

Engine • Mechanical(H4DOTC) • Engine Assembly • Removal 2015 Subaru Forester MECHANICAL(H4DOTC) > Engine Assembly REMOVAL 1. Open the front hood, and remove the upper grille bracket from the front hood. 2. Using a marker pen, make alignment marks...

Engine • Mechanical(H4DOTC) • Engine Assembly • Removal 2013 Subaru Forester MECHANICAL(H4DOTC) > Engine Assembly REMOVAL 1. Change the bolt installation position from (A) to (B), then open the front hood completely. Tightening torque: 7.5 N·m (0.8...

Engine • Mechanical(H4DOTC) • Engine Assembly • Removal 2010 Subaru Forester MECHANICAL(H4DOTC) > Engine Assembly REMOVAL 1. Set the vehicle on a lift. 2. Change the bolt installation position from (A) to (B), then open the front hood completely....

Engine • Mechanical(H4DOTC) • Engine Assembly • Installation 2009 Subaru Forester MECHANICAL(H4DOTC) > Engine Assembly INSTALLATION 1. Install the engine mount onto the engine. Tightening torque: 35 N·m (3.6 kgf-m, 25.8 ft-lb) 2. Position the engine in...

Engine • Mechanical(H4DOTC) • Engine Assembly • Installation 2008 Subaru Forester MECHANICAL(H4DOTC) > Engine Assembly INSTALLATION 1. Install the front cushion rubbers. Tightening torque: 35 N·m (3.6 kgf-m, 25.8 ft-lb) 2. Apply a small amount of grease...
© 2018. suforester.com
Order call back