Generation   Home
Categories
generation

Electrical

Sort by: default name

Heater & Airconditioner/Ventilator • HVAC System (Heater, Ventilator and A/C) • Relay and Fuse • Inspection 2015 Subaru Forester HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse....

Heater & Airconditioner/Ventilator • HVAC System (Heater, Ventilator and A/C) • Relay and Fuse • Inspection 2009 Subaru Forester HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Relay and Fuse INSPECTION (3) — (4): Continuity exists (1) — (2): Continuity does not exist While applying...

Engine • Starting/Charging Systems(H4SO) • Generator • Removal 2010 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Generator REMOVAL 1. Remove the collector cover. (Turbo model) 2. Disconnect the ground cable from battery. 3. Remove the collector...

Engine • Starting/Charging Systems(H4SO) • Generator • Installation 2007 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Generator INSTALLATION Install in the reverse order of removal. CAUTION: Check and adjust the V-belt tension. MECHANICAL(H4SO) > V-belt >...

Engine • Starting/Charging Systems(H4SO) • Generator • Inspection 2005 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Generator INSPECTION 1. DIODE CAUTION: Never use a mega tester (measuring use for high voltage) or any other similar measure for this...

Engine • Starting/Charging Systems(H4SO) • Generator • Inspection 2010 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Generator INSPECTION 1. DIODE CAUTION: There is the possibility of damaging the diodes if a mega-tester (used to measure high voltages) or...

Engine • Starting/Charging Systems(H4SO) • Generator • Disassembly 2010 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Generator DISASSEMBLY 1. Remove the four through-bolts. 2. Use a drier to heat the rear cover (A) portion to 50°C (122°F). 3. Insert...

Engine • Starting/Charging Systems(H4SO) • Generator • Assembly 2005 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Generator ASSEMBLY To assemble, reverse order of disassembly. 1. Pulling up brush Before assembling, press the brush down into brush...

Engine • Starting/Charging Systems(H4SO) • Battery • Removal 2005 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Battery REMOVAL 1. Disconnect the positive (+) cable after disconnecting the ground (?) cable of battery. 2. Remove the flange nuts from...

Engine • Starting/Charging Systems(H4SO) • Battery • Inspection 2008 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Battery INSPECTION WARNING: • Battery fluid is corrosive acid and has toxicity; be careful of handling the fluid. • Do not let the...

Engine • Starting/Charging Systems(H4SO) • Battery • Inspection 2005 Subaru Forester STARTING/CHARGING SYSTEMS(H4SO) > Battery INSPECTION WARNING: • Electrolyte has toxicity; be careful handling the fluid. • Avoid contact with skin, eyes or clothing....

Engine • Starting/Charging Systems(H4DO) • Generator • Disassembly 2015 Subaru Forester STARTING/CHARGING SYSTEMS(H4DO) > Generator DISASSEMBLY 1. Remove the cap from the generator. 2. Remove the four through bolts. 3. Use a drier to heat the rear cover...

Engine • Fuel Injection (Fuel Systems)(H4SO) • Fuel Pump Relay • Removal 2010 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4SO) > Fuel Pump Relay REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the glove box lower cover. EXTERIOR/INTERIOR TRIM >...

Engine • Fuel Injection (Fuel Systems)(H4SO) • Electronic Throttle Control Relay • Removal 2010 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4SO) > Electronic Throttle Control Relay REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the glove box lower cover....

Engine • Fuel Injection (Fuel Systems)(H4DOTC) • Main Relay • Inspection 2013 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DOTC) > Main Relay INSPECTION 1. Check that the main relay has no deformation, cracks or other damages. 2. Measure the resistance between...

Engine • Fuel Injection (Fuel Systems)(H4DO) • Tumble Generator Valve Assembly • Removal 2013 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Assembly REMOVAL 1. Release the fuel pressure. FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel > PROCEDURE 2....

Engine • Fuel Injection (Fuel Systems)(H4DO) • Tumble Generator Valve Assembly • Inspection 2013 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Assembly INSPECTION 1. CHECK MOTOR 1. Connect the battery positive terminal to terminal No. 5 and the battery...

Engine • Fuel Injection (Fuel Systems)(H4DO) • Tumble Generator Valve Actuator • Removal 2015 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Actuator REMOVAL 1. Disconnect the ground cable from battery. 2. Disconnect the connector (A) from tumble...

Engine • Fuel Injection (Fuel Systems)(H4DO) • IG Relay • Removal 2015 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DO) > IG Relay REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the glove box. EXTERIOR/INTERIOR TRIM > Glove Box > REMOVAL 3....

Engine • Fuel Injection (Fuel Systems)(H4DO) • IG Relay • Inspection 2015 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DO) > IG Relay INSPECTION 1. Check that the IG relay has no deformation, cracks or other damages. 2. Measure the resistance between the IG...

Engine • Fuel Injection (Fuel Systems)(H4DO) • Fuel Pump Relay • Inspection 2013 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Pump Relay INSPECTION 1. Check that the fuel pump relay has no deformation, cracks or other damages. 2. Measure the resistance...

Engine • Fuel Injection (Fuel Systems)(H4DO) • Electronic Throttle Control Relay • Inspection 2013 Subaru Forester FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Electronic Throttle Control Relay INSPECTION 1. Check that the electronic throttle control relay has no deformation, cracks or other...

Control System • Lan System (Diagnostics) • General Description • Preparation Tool 2013 Subaru Forester LAN SYSTEM (DIAGNOSTICS) > General Description PREPARATION TOOL 1. SPECIAL TOOL ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 1B022XU0 SUBARU SELECT...

Control System • Lan System (Diagnostics) • General Description • Caution 2013 Subaru Forester LAN SYSTEM (DIAGNOSTICS) > General Description CAUTION 1. SUPPLEMENTAL RESTRAINT SYSTEM “AIRBAG” Airbag system wiring harness is routed near the body integrated unit and...

Control System • Body Control System (Diagnostics) • General Description • Preparation Tool 2015 Subaru Forester BODY CONTROL SYSTEM (DIAGNOSTICS) > General Description PREPARATION TOOL 1. SPECIAL TOOL ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 1B022XU0...

Brake • Vehicle Dynamics Control (VDC) • Relay and Fuse • Inspection 2015 Subaru Forester VEHICLE DYNAMICS CONTROL (VDC) > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. 2. CHECK...

Body & Electrical • Wiper and Washer Systems • Relay and Fuse • Inspection 2015 Subaru Forester WIPER AND WASHER SYSTEMS > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. 2. CHECK RELAY...

Body & Electrical • Lighting System • Relay and Fuse • Inspection 2015 Subaru Forester LIGHTING SYSTEM > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse is...

Body & Electrical • Communication System • Relay and Fuse • Inspection 2015 Subaru Forester COMMUNICATION SYSTEM > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and check visually. 2. If the fuse is blown out, replace the fuse. 2. CHECK RELAY 1....

SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and check visually. 2. If the fuse is blown out, replace the fuse.

POWER REAR GATE SYSTEM > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse...

INSTRUMENTATION/DRIVER INFO > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the...

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > IG Relay INSTALLATION Install in the reverse order of removal.

EyeSight > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse is blown...

ENTERTAINMENT > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse is blown...

CRUISE CONTROL SYSTEM > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse...

BODY CONTROL SYSTEM (DIAGNOSTICS) > General Description CAUTION 1. SRS AIRBAG SYSTEM Airbag system wiring harness is routed near the body integrated unit and body control...

FUEL INJECTION (FUEL SYSTEMS)(H4DOTC) > Tumble Generator Valve Assembly INSPECTION 1. Check that the tumble generator valve assembly has no deformation, cracks or other...

FUEL INJECTION (FUEL SYSTEMS)(H4DOTC) > Main Relay INSTALLATION Install in the reverse order of removal.

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Assembly INSTALLATION Install in the reverse order of removal. NOTE: Use a new gasket. Tightening torque: 25...

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Assembly ASSEMBLY Assemble in the reverse order of disassembly. NOTE: Use a new gasket. Tightening torque: 6...

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Actuator INSTALLATION Install in the reverse order of removal. NOTE: Use a new gasket. Tightening torque: 6...

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Actuator INSPECTION 1. Check that the tumble generator valve actuator has no deformation, cracks or other...

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Main Relay INSTALLATION Install in the reverse order of removal.

STARTING/CHARGING SYSTEMS(H4SO) > Battery INSTALLATION Install in the reverse order of removal. Tightening torque: 3.4 N·m (0.35 kgf-m, 2.5 ft-lb) NOTE: • Clean the...

STARTING/CHARGING SYSTEMS(H4SO) > Battery MEASUREMENT WARNING: Do not bring an open flame close to the battery at this time. CAUTION: • Prior to charging, corroded...
© 2018. suforester.com
Order call back