Generation   Home
Categories
generation

Driveline

Sort by: default name

DIFFERENTIALS > Rear Differential Front Oil Seal INSPECTION Check that there is no leakage from front oil seal portion. If there is any leakage replace the oil seal and...

DIFFERENTIALS > General Description CAUTION • Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing any work. • Remove...

DIFFERENTIALS > Rear Differential ASSEMBLY NOTE: • Assemble in the reverse order of disassembly. • Check and adjust each part during assembly. • Keep the shims and...

DRIVE SHAFT SYSTEM > Rear Axle DISASSEMBLY For removal procedures of the bushing, refer to “Rear Trailing Link” in “REAR SUSPENSION”. REAR SUSPENSION > Rear Trailing Link >...

DRIVE SHAFT SYSTEM > Rear Axle ASSEMBLY For installation procedures of the bushing, refer to “Rear Trailing Link” in “REAR SUSPENSION”. REAR SUSPENSION > Rear Trailing Link...

DIFFERENTIALS > Rear Differential Member INSPECTION 1. Check the rear differential member for damage, bend or corrosion. If damage, bend or corrosion is excessive, replace...

AUTOMATIC TRANSMISSION(4AT) > Rear Drive Shaft INSTALLATION 1. Select the shim. AUTOMATIC TRANSMISSION(4AT) > Transfer Clutch > ADJUSTMENT 2. Install drive plate and driven...

TRANSFER CASE > General Description NOTE For a general description, refer to the “4AT” and the “5M” sections. AT model AUTOMATIC TRANSMISSION(4AT) > General Description MT...

DRIVE SHAFT SYSTEM > General Description CAUTION • Wear work clothing, including a cap, protective goggles and protective shoes during operation. • Remove contamination...

DIFFERENTIAL > Rear Differential ADJUSTMENT 1. SIDE GEAR BACKLASH Adjust the side gear backlash. DIFFERENTIAL > Rear Differential > ASSEMBLY 2. HYPOID DRIVEN GEAR BACKLASH...

DIFFERENTIAL > Rear Differential Side Oil Seal INSPECTION Make sure that there is no oil leakage from side oil seal. If there is oil leakage, replace the oil seal.

DIFFERENTIAL > Rear Differential Member REMOVAL 1. Set the vehicle on a lift. 2. Disconnect the ground cable from battery. 3. Move the select lever or gear shift lever to...

DIFFERENTIAL > Rear Differential Member INSPECTION 1. Check the rear differential member for damage, bend or corrosion. If damage, bend or corrosion is excessive, replace...

DIFFERENTIAL > General Description CAUTION • Wear work clothing, including a cap, protective goggles and protective shoes during operation. • Remove contamination...

DIFFERENTIAL > Rear Differential ASSEMBLY NOTE: • Assemble in the reverse order of disassembly. • Check and adjust each part during assembly. • Keep the shims and...

DRIVE SHAFT SYSTEM > Rear Drive Shaft INSPECTION Check the removed parts for damage, wear, corrosion etc. If faulty, repair or replace. 1. DOJ (Double Offset Joint) Check...

DRIVE SHAFT SYSTEM > General Description CAUTION • Wear working clothing, including a cap, protective goggles, and protective shoes during operation. • Remove...

DIFFERENTIALS > Rear Differential Side Oil Seal INSPECTION Make sure that there is no oil leakage from side oil seal. If there is any oil leakage, replace the oil seal.

DIFFERENTIALS > Rear Differential Member REMOVAL 1. Set the vehicle on a lift. 2. Disconnect the ground cable from battery. 3. Move the selector lever or gear shift lever...

DIFFERENTIALS > General Description CAUTION • Wear working clothing, including a cap, protective goggles, and protective shoes during operation. • Remove contamination...

AUTOMATIC TRANSMISSION(4AT) > Rear Drive Shaft INSPECTION • Make sure that each component is free of harmful gouges, cuts, or dust. • Measure the extension end play and...

AUTOMATIC TRANSMISSION(4AT) > Front Differential Assembly INSPECTION • Check each component for harmful cuts, damage and other faults. • Measure the backlash and adjust to...

AUTOMATIC TRANSMISSION(4AT) > Center Differential Carrier INSPECTION • Make sure that each component is free of harmful gouges, cuts, or dust. • Measure...
© 2018. suforester.com
Order call back