Generation   Home
Categories
generation

Chassis

Sort by: default name

ENTERTAINMENT > Steering Switch INSTALLATION Install each part in the reverse order of removal.

Body & Electrical • Entertainment • Steering Switch • Removal 2013 Subaru Forester ENTERTAINMENT > Steering Switch REMOVAL 1. Set the front wheels in straight ahead position. 2. Turn the ignition switch to OFF. 3. Disconnect the ground cable from battery...

Body & Electrical • Instrumentation/Driver Info • Steering Switch • Removal 2015 Subaru Forester INSTRUMENTATION/DRIVER INFO > Steering Switch REMOVAL 1. Position the front wheels straight ahead. (After moving a vehicle 5 m (16 ft) or more with front wheels positioned...

Body & Electrical • Lighting System • Rear Height Sensor • Inspection 2015 Subaru Forester LIGHTING SYSTEM > Rear Height Sensor INSPECTION UNIT INSPECTION Preparation tool: Circuit tester 1. Connect three dry cell batteries (1.5 V) in series. 2. Connect the (+)...

LIGHTING SYSTEM > Rear Height Sensor INSTALLATION Install each part in the reverse order of removal. Tightening torque: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb) NOTE: If the rear...

LIGHTING SYSTEM > Rear Height Sensor INSTALLATION CAUTION: Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing so may cause...

Body & Electrical • Lighting System • Rear Height Sensor • Removal 2015 Subaru Forester LIGHTING SYSTEM > Rear Height Sensor REMOVAL CAUTION: • Always remove the sensor assembly - headlight beam leveler before removing any parts related to the suspension. •...

Brake • ABS • ABS Control Module and Hydraulic Control Unit (Abscm & H/U) • Inspection 2005 Subaru Forester ABS > ABS Control Module and Hydraulic Control Unit (ABSCM&H/U) INSPECTION 1. Check the connected and fixed condition of connector. 2. Check specifications of the mark with...

Brake • ABS • ABS Control Module and Hydraulic Control Unit (Abscm & H/U) • Installation 2008 Subaru Forester ABS > ABS Control Module and Hydraulic Control Unit (ABSCM&H/U) INSTALLATION 1. Install the ABSCM&H/U bracket. Tightening torque: 33 N·m (3.4 kgf-m, 24.6 ft-lb) 2. Install...

Brake • ABS • ABS Control Module and Hydraulic Control Unit (Abscm & H/U) • Removal 2005 Subaru Forester ABS > ABS Control Module and Hydraulic Control Unit (ABSCM&H/U) REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the air cleaner case to facilitate removal of...

Brake • ABS • ABS Control Module and Hydraulic Control Unit (Abscm & H/U) • Replacement 2005 Subaru Forester ABS > ABS Control Module and Hydraulic Control Unit (ABSCM&H/U) REPLACEMENT CAUTION: • Because the seal of ABSCM cannot be replaced, do not pull or peel it with lifting up....

Brake • ABS • ABS Sequence Control • Operation 2005 Subaru Forester ABS > ABS Sequence Control OPERATION 1. Under the ABS sequence control, after the hydraulic unit solenoid valve is driven, the operation of the hydraulic unit can be checked...

Brake • ABS • ABS Sequence Control • Operation 2008 Subaru Forester ABS > ABS Sequence Control OPERATION 1. While the ABS sequence control is being performed, the operation of the hydraulic unit can be checked using the brake tester or...

ABS > Front ABS Wheel Speed Sensor ADJUSTMENT Adjust the gap using spacer (Part No. 26755A000).

Brake • ABS • Front ABS Wheel Speed Sensor • Inspection 2005 Subaru Forester ABS > Front ABS Wheel Speed Sensor INSPECTION 1. ABS WHEEL SPEED SENSOR 1. Check the pole piece of ABS wheel speed sensor for foreign particles or damage. If necessary,...

Brake • ABS • Front ABS Wheel Speed Sensor • Installation 2005 Subaru Forester ABS > Front ABS Wheel Speed Sensor INSTALLATION 1. Temporarily install the front ABS wheel speed sensor on housing. CAUTION: Be careful not to strike the ABS wheel speed...

Brake • ABS • Front ABS Wheel Speed Sensor • Removal 2006 Subaru Forester ABS > Front ABS Wheel Speed Sensor REMOVAL 1. Disconnect the ground cable from battery. 2. Disconnect the ABS wheel speed sensor connector located next to the front strut...

ABS > Front Tone Wheel INSTALLATION Refer to Front Drive Shaft, because front tone wheel is integrated with front drive shaft. DRIVE SHAFT SYSTEM > Front Drive Shaft >...

ABS > Front Tone Wheel INSTALLATION The front tone wheel is integrated with the front drive shaft. Refer to the section on Front Drive Shaft. DRIVE SHAFT SYSTEM > Front...

ABS > Front Tone Wheel REMOVAL Refer to Front Drive Shaft, because front tone wheel is integrated with front drive shaft. DRIVE SHAFT SYSTEM > Front Drive Shaft > REMOVAL

ABS > Front Tone Wheel REMOVAL The front tone wheel is integrated with the front drive shaft. Refer to the section on Front Drive Shaft. DRIVE SHAFT SYSTEM > Front Drive...

ABS > G Sensor INSPECTION STEP CHECK YES NO 1.CHECK SUBARU SELECT MONITOR. Is a Subaru Select Monitor available? ABS > G Sensor > INSPECTION ABS > G Sensor...

ABS > G Sensor INSTALLATION Install in the reverse order of removal. Tightening torque: 18 N·m (1.8 kgf-m, 13.0 ft-lb) CAUTION: Do not drop or bump the G sensor.

Brake • ABS • G Sensor • Removal 2006 Subaru Forester ABS > G Sensor REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the console cover. EXTERIOR/INTERIOR TRIM > Console Box > REMOVAL 3. Disconnect the...
© 2018. suforester.com
Order call back