Generation   Home
Categories
generation

Brake Pedal Assembly

Sort by: default name

Brake • Brake • Brake Pedal • Removal 2006 Subaru Forester BRAKE > Brake Pedal REMOVAL 1. AT MODEL 1. Disconnect the ground cable from battery. 2. Remove the instrument panel lower cover from instrument panel. 3. Remove the clevis...

Brake • Brake • Brake Pedal • Removal 2013 Subaru Forester BRAKE > Brake Pedal REMOVAL 1. MT MODEL 1. Remove the steering column. POWER ASSISTED SYSTEM (POWER STEERING) > Steering Column > REMOVAL 2. Disconnect the connector from...

Brake • Brake • Brake Pedal • Installation 2009 Subaru Forester BRAKE > Brake Pedal INSTALLATION 1. Install the bolt and nut which secure the brake pedal bracket. Tightening torque: 18 N·m (1.8 kgf-m, 13.0 ft-lb) 2. Install clevis pin...

Brake • Brake • Brake Pedal • Inspection 2005 Subaru Forester BRAKE > Brake Pedal INSPECTION 1. Move the brake and clutch pedal pads in the lateral direction with a force of approx. 10 N (1 kgf, 2 lb) to ensure pedal deflection is in...

Brake • Brake • Brake Pedal • Inspection 2015 Subaru Forester BRAKE > Brake Pedal INSPECTION 1. Move the pad - brake pedal in a horizontal direction with a force of approx. 10 N (1 kgf, 2 lbf), and check that the pedal deflection is in...

Brake • Brake • Brake Pedal • Inspection 2013 Subaru Forester BRAKE > Brake Pedal INSPECTION 1. Move the brake pedal pads in a horizontal direction with a force of approx. 10 N (1 kgf, 2 lbf), and check that the pedal deflection is in...

Brake • Brake • Brake Pedal • Disassembly 2008 Subaru Forester BRAKE > Brake Pedal DISASSEMBLY 1. AT MODEL 1. Remove the brake switch. BRAKE > Stop Light Switch > REMOVAL 2. Unbolt, and then remove the brake pedal. 3. Remove the...

Brake • Brake • Brake Pedal • Assembly 2008 Subaru Forester BRAKE > Brake Pedal ASSEMBLY 1. Position the stop light switch, etc. to the brake pedal. 2. Clean the inside of bores of the clutch pedal and brake pedal, apply grease, and...

Brake • Brake • Brake Pedal • Assembly 2005 Subaru Forester BRAKE > Brake Pedal ASSEMBLY 1. Attach the stop light switch, etc. to pedal bracket temporarily. 2. Clean the inside of bores of clutch pedal and brake pedal, apply grease,...

BRAKE > Brake Pedal INSTALLATION 1. Install each part in the reverse order of removal. CAUTION: • Apply grease to the snap pin to prevent the operating rod from wear. •...

BRAKE > Brake Pedal INSTALLATION 1. Install in the reverse order of removal. CAUTION: • If the cable clamp is damaged, replace it with a new one. • Never fail to cover...
© 2018. suforester.com
Order call back